Loading... Please wait...

Spoolgun option for a Millermatic 135 and Millermatic 175

Posted by

On the Millermatic 135 & 175  You can hook up the spoolgun and a miller style 300409 switch kit . If your 

Serial# is LC175022 and above ( with the 2 pin square drive motor plugs) the switch plugs into the harness . If it 

is a lower serial number , you have to do some wiring , but not hard to do)

NORSTAR BADGER SPOOLGUN AND MILLER SPOOLMATE 100 SWITCH FOR MILLERMATIC 135 & 175 MIG WELDERS

THIS KIT FITS THESE 2 MODELS

INSTRUCTIONS ARE INCLUDED

REMOVE MM COVER

UNPLUG THE DRIVE MOTOR FROM THE PC BOARD

DRILL A HOLE FOR THE SWITCH INSIDE WHERE SHOWS

PLUG IN THE WHITE PLUGS ON THE SWITCH INTO THE PC BOARD AND THE DRIVE MOTOR PLUG

PLUG IN THE RED AND BLACK WIRES INTO THE EMPTY 2 PINS ON THE 4 PIN TRIGGER RECEPTACLE

IF THE SPOOLGUN RUNS BACKWARDS REVERSE THE RED AND BLACK WIRES ON THE SWITCH( NOT THE 4 PIN RECEPTACLE)

THIS IS NOT A MILLER SWITCH