Loading... Please wait...

Our Newsletter


Harris Portatorch 4403078 Torch Set W/Cylinders

  • Image 1
Price:
$479.00
SKU:
HAC 4403078
Brand:
Weight:
20.00 LBS
Shipping:
Free Shipping
Quantity:


Product Description

HARRIS PORT-A-TORCH (w/cyl. empty)
List Price: $733.00

PARTS # 4403078
 

The Port-A-Torch stores all the equipment you need for cutting, welding and brazing in a rugged, molded, plastic carrying case. Includes one MC acetylene cylinder and one 20 CF oxygen cylinder (both shipped empty). Cuts to 1” and welds to 1/16” with equipment supplied. Can cut 4” and weld to 1/2” with larger tips and acetylene cylinder (oxygen & acetylene cylinders included).


PART 4403078
NUMBER MODEL 16601-200-DLX
NUMBER HANDLE 16
MIXER H-16-2E
CUTTING ATTACH. 71-3
CUTTING TIP 6290-1AC
WELDING TIP 23A90-3
OXYGEN REGULATOR 601-100-540
FUEL GAS REGULATOR 601-15-200
ACCESSORIES GOGGLES,STRIKER,12’ 3/16” HOSE,20 CU.FT. OXY CYL

 

 

Basic How-To

For those getting started (please refer to your instruction manual for operation instructions), you'll need to know the following (these ARE NOT directions for proper usage.. if in doubt, take a class, read a book, or ask a master welder):

  1. The new tanks you get will most likely get exchanged out for pre-filled tanks at your local welding supply store so don't get attached to those newly painted tanks that you just bought moments before!
  2. Always keep your tanks upright (i.e. do not lay them down)
  3. Oxygen tanks are usually green and any oxygen-related fitting is also green
  4. Acetylene tanks are sometimes red but their fittings are usually red
  5. The torch comes installed with a check flow valve or flashback arrestors. Check valves prevent backwards flow while flashback arrestors cuts off the gas flow in the event of a flashback.
  6. Acetylene hose thread is LEFT handed while everything else is RIGHT handed. The left-handed thread will have markings or indentations on it.
  7. Do not use teflon tape on the threads
  8. Oxygen and acetylene pressure to the hose should be equal (for example, 3 psi oxygen, 3 psi acetylene)
  9. Acetylene pressure should not exceed 15 psi (your regulator will show a "red zone" after 15 psi). Adjust this by letting out pressure with the torch and adjust accordingly.
  10. Wear welding woggles and gloves. Protect your eyes and hands! Welding goggles or full face shields will not be as dark as those used in arc welding processes, so you'll be able to wear them even as you prepare to weld. Lens shades 0f 3-5 should be good for this setup.
  11. Never use oil or grease on or around oxygen equipment
  12. Always ONLY use a striker to light your torch
  13. To light your torch, open the torch valve for acetylene and then strike it, then apply the proper oxygen flow for the right neutral flame.

Warranty Information

20

Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the Harris Portatorch 4403078 Torch Set W/Cylinders to your wish list.

You Recently Viewed...