Miller Spectrum 625 Plasma CutterPart #907058011 BRAND NEWFREE SHIPPING IN THE 48 STATESA portable plasma arc cutter that can produce a 5/8 inch quality cut, the Spectrum 625 has loads of features that make your cutting needs a breeze. The Spectrum's ICE-40C torch is ergonomically designed to increase comfort, and the safety trigger prevents accidental starts. Pilot Arc Controller improves tip life and maintains uninterrupted cutting. |
Features:- Compatible with engine-driven welders capable of cutting 3/8 to 5/8 in mild steel when powered by a Miller engine-driven welder with a 240 V generator power outlet of 8 kW or more.
- Power Factor Correction (PFC) circuitry draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
- Starts without high-frequency so it will not interfere with or damage controls or computers.
- LED indicators for pressure, power, cup and temperature allow faster trouble-shooting, eliminating unnecessary downtime.
- Consumables storage compartment provides convenient access to consumables and parts.
- LVC™ Line Voltage Compensation - Keeps output of the power source constant regardless of fluctuation in input power ± 10%.
- Wind Tunnel Technology™ - Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.
- Fan-On-Demand™ - Internal power source cooling system that only works when needed, keeping internal components cleaner.
- Blow Back Torch Design - The plasma arc is created by pulling an electrical arc between an electrode and tip. This process eliminates high frequency by forcing an electrical arc between the two pieces.
- Pilot Arc Switch - The expanded metal mode allows operator to cut grates, chain link fence, and other perforated metals without retriggering the gun.
- Post Flow Cooling Circuit - Protection to extend the life of consumables and the welding torch is enhanced by our post flow circuit that provides shielding gas after you release the trigger.
Comes complete with:- ICE-40C hand-held torch with 50 ft (15.2 m) cable.
- 20 ft (6.1 m) heavy-duty (8 AWG) work cable with clamp.
- Extra consumables (3 electrodes, 3 tips and 1 air fitting).
- 12 ft (3.7 m) industrial power cord and plug.
Accessories: EXTRA- Motor Guard Air Filter: For Spectrum 701, 2050, 3080 and 1250 - This filter is equipped with a mounting bracket that allows installation on the top, side or rear panel of most plasma cutter. The filter is equipped with a 1/4 in NPT port to match the fittings on plasma systems. Part # 042306.
- Replacement Filter Element: Carton of four filters for use with motor guard air filter. Part # 042312.
- Plasma Standoff Roller Guide: Helps maintain recommended standoff distance to maximize cutting performance and improve tip life. Part # 194883.
- No. 30A Economy Cart with Corp Wrap: This economical running gear provides mobility with an angle for easy front panel access and extra storage space. Part # 195093.
- Protective Cover: Covers unit with all cables connected. Easy-off handle/ wall hanging strap. Part # 195145.
- RTI Air Filter / Dryer: Part # 195188.
- Suction/Magnetic Pivot Base: Add this to your cutting guide for convenient attachment to all flat surfaces. The extended arm accommodates holes up to 30 in diameter. Part # 195979.
- Plasma Circle-Cutting Guides: For ICE-12C, 25C, 50C, 55C, and 80C - Cut straight lines or circles up to 12 inches in diameter. Part # 195981.
Machine Specifications| Stock Number | Max/
Open
Circuit
Voltage | Amps Input at Rated Output,
50/60 Hz. 1 ph. | Plasma Gas | Dimensions | Net
Weight | | 208 V | 230 V | KVA | KW | Flow / Pressure | (907058011) 50 ft. Torch
208/230 V. | 260 VDC. | 33 | 30 | 3.9 | 6.7 | 6 CFM (170 L/min)
at 75 PSI (517 kPa) | H: 15 1/4"
(387 mm)
W: 10 3/8"
(264 mm)
D: 17 1/4"
(438 mm) | 60 lbs
(27 kgs) |
|
