	800-783-3073 Mon- Fri 8-5 EST and Sat 9-12 EST

Home > Hobart Welders > Hobart Mig Welders > Hobart Trek 180 Battery Powered Mig Welder # 500539

Hobart Trek 180 Battery Powered Mig Welder # 500539

View Larger Image

Add to Wishlist

Item #: MIL 500539

Price : $1,160.00

Quantity :

Hobart Trek 180 Battery Powered

Mig Welder # 500539

Hobart Trek® 180 MIG Welder - Battery Powered 500539

The Hobart Trek® 180 battery-powered wire welder is the first professional system on the market for MIG welding “off the power grid.” No matter where your hobby or job takes you, the Trek® delivers heavy duty weld power to fabricate or repair 24 ga. up to 1/4 in. mild steel in a single pass. Powered by two internal sealed lead-acid batteries, the high-purity energy storage technology enables the Trek® to be charged completely in about 90 minutes and quickly recharged in about 40 minutes. The integrated charging system is powered by standard 115 volt household current and can operate while plugged in or completely cordless. The Trek delivers 180 amps (approx. 10% duty cycle) on 115 volt standard power … a weld output which, until Trek®, has been limited to 230 volt welders. The unit is setup for both self-shielded flux-cored and solid gas-shielded wires from .024 to the .035 diameter.

Applications
Maintenance
Construction
Auto Body
Farm/Ranch
Rental
Home
Off-road

Features

Infinite voltage and wire feed control for precise arc performance

Welds 24 gauge up to ¼ inch mild steel, 180 A maximum output

Built-in cast aluminum wire feeder with quick-release drive roll lever and quick-change drive roll

Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding

Easy access to polarity changeover includes storage holes for spare tips

Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6 mm) and .030 - .035 in. (0.8 - 0.9 mm) wire

Twin 12 V premium high-performance sealed lead-acid batteries, run on batteries or plugged in the wall

The only 180 A welder that operates on 115 VAC

Welds approximately 100 inches of 1/8 in. mild steel before recharging with extremely fast recharge times (approx. 40 min. on 115 VAC outlet) from its built-in charger

Capable of recharging on automotive power inverter (400 continuous watts minimum) using AutoPower technology to detect input power

Voltage control delivers consistent arc regardless of battery charge level

Tough polymer case protects against extreme environments

Unit weighs only 51.9 lb. (23.5 kg) including batteries

LED indicators provide basic operation feedback

Removable storage bag provides cable management of standard MIG gun, work cable, clamp

Comes Complete With

Hobart Trek® 180 battery powered MIG welder

Built-in gas solenoid valve and polarity changeover

Ergonomic 10 ft. (3m) H100L4-10 MIG torch

Removable power/recharging cord with plug

10 ft. (3 m) work cable with clamp