Miller Dynasty 200 DX Series AC DC TIG STICK WELDER PART # 907 099 011 Includes the Contractor Kit 195054 w/Foot Control .jpg)
.jpg)
BRAND NEW FREE SHIPPING IN THE 48 STATES Maximum flexibility -- Miller Electric combines advanced inverter technology with Auto-Line technology offering the most flexible AC/DC TIG Stick power supply in the welding industry
| Features:NEW! Blue Lightning™ - High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenance on solid state components. |
Advanced Squarewave arc for improved weldability on aluminum and magnesium using low power. Continuous high-frequency is not needed because of the advanced Squarewave arc, and extended balance control allows you to fine tune the duration of the electrode negative portion of the cycle from 30 to 90%. This provides precise cleaning control and prolonged tungsten life. - AC frequency control range of 20 - 250 Hz. provides control for a focused arc, resulting in better directional control to help produce desired arc/weld bead characteristics.
- Built-in pulser reduces heat input; adds arc stabiility (DX model only).
- Fan-On-Demand cooling system only operates when needed.
- Auto-Line provides state-of-the-art flexibility by automatically connecting to 120 - 460 VAC, single or three phase power without removing the covers to relink the power source.
- Portable in the shop or at the job site -- at 45 lb the unit is easily moved from location to location.
- Superior TIG/Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010.
- Low OCV Stick is a simple design that reduces open-circuit voltage to 13 volts when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
- Inverter-based, AC/DC power source has state-of-the-art operator interface allowing the user extra set-up capabilities in a compact machine. Features more precise control of output parameters.
- HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination.
- Lift-Arc start provides TIG arc starting without use of high frequency.
- Programmable HF start parameters allows the operator to independently set HF starting conditions based upon process or application.
- Extended AC Balance Control range (30 - 90% EN) allows precise cleaning control and prolonged tungsten life.
- Blue Lightning -High frequency Arc Starter for non-contact arc initation.
- More consistent arc starts compared to traditional HF arc starters
- Greater reliability and no maintenance on solid state components . Preset parameters for tungsten sizes from .020 -1/8" provide optimized starting for applications from thick to micro thin material. For unique applications , custom settings are programmable.
- Stick Features : Tailored arc control (DIG) allows the arc characteristic to be changed for specific applications and electrodes. Smooth running 7018 or stiffer , more penetrating 6010.
- DC DIG fertures: Exceptionally smooth and precise arc for welding exotic materials.
- Contractor Kit includes: Protective Case with carrying handle, DB1725R (25 ft) TIG torch, RFCS-14 HD foot control, International Style Torch Adapters, Regulator/Flowmeter, 200A Electrode Holder with 15 ft cable, 300A Work Clamp with 15 ft cable, 12 ft Gas Hose, AK-2 Torch accessory kit, Gas hose coupler.
Process: - TIG ( GTAW ).
- Pulsed TIG ( GTAW-P ) with DX models.
- Stick ( SMAW ).
Model Available: - Dynasty 200 DX: When the job demands greater control the DX provides pulse on/off, pulse frequency, peak % time, background amperage, initial amperage, initial slope time, final slope time and final amperage control.
Accessories: EXTRA - Adapter Cord: 1 ft (305 mm) cord with 14-pin plug to 5-socket receptacle for use with 5-pin remote controls. Part # 041947.
- Coolmate 4 115 VAC: The best performer in its class. The tough, one-piece case is portable and rustproof. A carrying handle and filler spout are molded into the case. Cools torches and guns rated up to 600 amps. Part # 042288.
- PC-300 Pulsed TIG (DC GTAW) Control: Can be used with AC or DC welding power sources with, or without, built-in HF or with external HF units (HF-251D-1 or Snap Start II). Non-inverter power source uses 0.5-20 pulses-per-second. Inverter power sources uses 0.5-20 or 10-300 pulses-per-second. Part # 042297.
- International-Style Connector Kit - 50 mm: Accepts #1 or #2 AWG cable size. Kit includes one International-style male plug which attaches to the work and/or weld cables and plugs into the International-style receptacles on the power source. Part # 042418.
- Extension Kit for International-Style Cable Connectors - 50 mm: Accepts #1 or #2 AWG size cable. Used to adapt or extend weld and/or work cables. Kit includes one male International-style plug and one in-line female International-style receptacle. Part # 042419.
- International/Tweco Adapter: A one-piece adapter which has an International-style male plug (to power source) on one end and a female Tweco receptacle (for weld cable connection) on other end. Part # 042465.
- International/Cam-Lok: A one-piece adapter which has an International-style male plug (to power source) on one end and a Cam-Lok receptacle (for weld cable connection) on other end. Part # 042466.
- International-Style Connector Kit - 70 mm: Accepts #1/0 or #2/0 AWG cable size. Kit includes one International-style male plug which attaches to the work and/or weld cables and plugs into the International-style receptacles on the power source. Part # 042533.
- Extension Kit for International-Style Cable Connectors - 70 mm: Accepts #1/0 or #2/0 AWG size cable. Used to adapt or extend weld and/or work cables. Kit includes one male International-style plug and one in-line female International-style receptacle. Part # 042534.
- XMT Cylinder Cart: Has adjustable handles and is slanted for convenient access to power source front panel controls. Carries two 160 lb (72.6 kg) gas cylinders, or one gas cylinder and a Coolmate V3 for TIG (GTAW) welding. Feeder mounted to tray above power source. Part # 042537.
- Universal Cart and Cylinder Rack: Accommodates gas cylinder up to 56 in (142.2 cm) high measuring 6 to 9 in (15.2 to 22.8 cm) in diameter. Provides Storage for auxiliary items such as electrodes, helmets gloves, etc. Part # 042934.
- Coolmate 3 115 VAC, 50/60 Hz: For use with water-cooled torches rated up to 600 amps. Unique paddle-wheel indicator, external filter and easy-fill spout. Part # 043007.
- Coolmate 3 230 VAC, 50/60 Hz: For use with water-cooled torches rated up to 600 amps. Unique paddle-wheel indicator, external filter and easy-fill spout. Part # 043008.
- Coolmate V3: For use with water-cooled torches rated up to 500 amps. Vertical design conveniently mounts to Miller cylinder rack in place of one cylinder. Part # 043009.
- RFCS-14 Remote Foot Control: Foot pedal provides remote current and contactor control . Includes 20 ft (6 m) cord and 14-pin plug. For all Miller solid-state power sources after serial number JK674521. Part # 043554.
- RCCS-14 Remote Contactor and Current Control: Up-and-down rotary-motion fingertip control fastens to TIG torch using two Velcro® straps. Includes 26.5 ft (8 m) control cord. Great for applications that require a finer amperage control. Part # 043688.
- Low-Conductivity Antifreeze/Coolant: Sold in multiples of four 1-gallon plastic bottles. Miller coolants contain a base of ethylene glycol and deionized water to protect against freezing to -37°F (-38°C) or boiling to 227°F (108°C). Also contains a compound that resists algae growth. Part # 043810.
- Deluxe Carrying Cart and Cylinder Rack: For Dynasty 300 Series and Maxstar 300 Series - Accommodates inverter power source, cooler, and one gas cylinder. Includes bottom drawer for miscellaneous items. Part # 043867.
- Extension Cords for Remote Controls and 24 VAC Wire Feeders, 25 ft: For 14-pin remote controls/24 VAC wire feeders. 14-pin plug to a 14-pin socket. (Not for XR, Optima™, or 60M series feeders.) Part # 122973.
- Extension Cords for Remote Controls and 24 VAC Wire Feeders, 50 ft: For 14-pin remote controls/24 VAC wire feeders. 14-pin plug to a 14-pin socket. (Not for XR, Optima™, or 60M series feeders.) Part # 122974.
- Extension Cords for Remote Controls and 24 VAC Wire Feeders, 75 ft: For 14-pin remote controls/24 VAC wire feeders. 14-pin plug to a 14-pin socket. (Not for XR, Optima™, or 60M series feeders.) Part # 122975.
- RMLS-14 Switch: Momentary- and maintained-contact rocker switch for contactor control. Push forward for maintained contact and back ward for momentary contact. Includes 26.5 ft (8 m) cord and 14-pin plug. Part # 129337.
- RHC-14 Hand Control: Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug. For all Miller solid-state power sources. Part # 129340.
- RCC-14 Remote Contactor and Current Control: Side-to-side rotary-motion fingertip control fastens to TIG torch using two Velcro® straps. Includes 26.5 ft (8 m) contol cord and 14-pin plug. Great for production or contractors that need quick ramp-up. Part # 151086.
- RMS-14 On/Off Control: Rubber-covered push button dome switch. Ideal for repetitive on-off applications. Includes 26.5 ft (8 m) cord and 14-pin plug. Part # 187208.
- Kit, HD: Kit includes: Protective Case with carrying handle, DB1725R (25 ft) TIG torch, RFCS-14 HD foot control, International Style Torch Adapters, Regulator/Flowmeter, 200A Electrode Holder with 15 ft cable, 300A Work Clamp with 15 ft cable, 12 ft Gas Hose, AK-2 Torch accessory kit, Gas hose coupler. for RFCS-14(043554). Part # 194743.
- RFCS-14 HD Foot Control: For all Miller solid-state power sources AFTER serial #JK674521. New design increases stability with a larger base and a heavy 20 ft cord that can exit the front, back or either side of the pedal. Provides remote current and contactor control. 14-pin plug. Part # 194744.
Machine Specifications Model
Stock Number | Welding
Mode | Input
Power | Rated Output | WeldingAmperage
Range | Max.
Open
Circuit
Voltage | Amps Input at Rated
Load Output, 50/60 Hz. | Dimensions | Net
Weight | | 120 V | 230 V | 400 V | 460 V | KVA | KW |
Dynasty 200 DX
(# 907 099-011) | TIG
(GTAW) | Three
Phase | 200 A at 18 V, 20% Duty Cycle | 1 - 200
(1 - 150 on
120 VAC) | 80 VDC
5 - 10* | --- | 13.7 | 8.7 | 6.9 | 5.5 | 5.2 | H: 13 1/2"
( 343 mm )
W: 7 1/2"
( 191 mm )
D: 21 1/2"
( 546 mm ) | 45 lbs
( 20.5 kgs ) | | 150 A at 16 V, 60% Duty Cycle | --- | 9.4 | 6.0 | 4.7 | 3.8 | 3.6 | Single
Phase | 150 A at 16 V, 60% Duty Cycle | --- | 15.8 | --- | 7.9 | 3.6 | 3.6 | | 140 A at 15.6 V, 40% Duty Cycle | 31 | --- | --- | --- | 3.6 | 3.5 | | 100 A at 14 V, 100% Duty Cycle | 20.7 | --- | --- | --- | 2.3 | 2.3 | Stick
(SMAW) | Three
Phase | 200 A at 28 V, 20% Duty Cycle | 1 - 200
(1 - 105 on
120 VAC) | 80 VDC
5 - 10* | --- | 20.8 | 13 | 10.2 | 8.1 | 7.8 | | 130 A at 25.2 V, 60% Duty Cycle | --- | 12.3 | 7.6 | 6.0 | 4.8 | 4.6 | Single
Phase | 130 A at 25.2 V, 60% Duty Cycle | --- | 20.0 | --- | 10.0 | 4.7 | 4.7 | | 100 A at 24 V, 60% Duty Cycle | 31.3 | --- | --- | --- | 3.6 | 3.5 | | 90 A at 23.6 V, 100% Duty Cycle | 27.6 | --- | --- | --- | 3.2 | 3.2 |
|
