Miller XMT 350 CC/CV Multiprocess Welder Part # 907161  The XMT 350 CC/CV multiprocess power source combines the advantages of inverter-based design with the built-in features of a high-end MIG machine. At only 80 lb (36.3 kg), the XMT 350 CC/CV offers the portability that allows you to take it anywhere it's needed. Plus, it can operate off either single-phase or three-phase power. It's rugged construction and protected internal components ensure reliable operation, even in the most abusive working conditions. |
Features: - Wind Tunnel Technology protects electrical components and PC boards from contamination.
- Fan-On-Demand cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through machine.
- Lift-Arc allows TIG starting without the use of high frequency. Starts the arc without contaminating the weld with tungsten..
- Adaptive Hot Start increases the output amperage at the start of a weld if necessary, eliminating electrode sticking.
- Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.
- Line voltage compensation keeps power constant even if power input varies by +/- 10%.
- Process selector switch reduces the number of control setup combinations without reducing any features.
- Large, dual digital meters are easy to view and presettable to ease setting weld output.
- Pulsed MIG capabilities with optional Optima control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emission.
- Lighweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.
- 115 VAC auxiliary power provides 10 amps of circuit-breaker-protected power for water circulators, etc. ( Standard on XMT-456, optional on XMT-304 and XMT-350 CC/CV models only ).
|
XMT 350 Additional Features: - Available in -- CC/CV
- Auto-Line technology allows for any input voltage hook-up ( 208 - 575 V ) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power..
- Reduced OCV operation -- an internal dip switch enables reduced open-circuit voltage Stick welding capability, OCV is typically below 10 volts.
- Auto Remote Sense enables unit to automatically use remote control if connected to remote control receptacle ( CC/CV models only ).
- Optional gas solenoid for TIG welding.
- Optional MIG Runner provides a factory-complete welding package capable of housing two gas cylinders, optional water cooler, all in the most floor-space efficient, andmaneuverable cart offered.
|
Processes: - MIG (GMAW).
- Pulsed MIG (GMAW-P) wit optional controls.
- Stick (SMAW).
- TIG (DC GTAW).
- Pulsed TIG (GTAW-P) with optional controls.
- Flux Cored (FCAW).
- Air Carbon Arc Cutting and Gouging (CAC-A). (5/16" carbons).
|
Stock
Number | Input
Power | Rated
Output | Voltage
Range
in CV
Mode | Amperage
Range in
CC Mode | Max.
Open
Circuit
Voltage | Amps Input at Rated Load
Output, 60 Hz. | Dimensions | Net
Weight | | 208 V | 230 V | 400 V | 460 V | 575 V | KVA | KW | ( # 907 161 )
208 - 575 V
| Three
Phase | 350 A at 34 VDC
60% Duty Cycle | 10 - 35 | 5 - 425 A | 75 VDC | 40.4 | 36.1 | 20.6 | 17.8 | 14.8 | 14.2 | 13.6 | H: 17"
(432 mm)
W: 12 1/2"
(318 mm)
D: 24"
(610 mm) | 80 lbs
( 36.3 kg ) | Single
Phase | 300 A at 32 VDC
60% Duty Cycle | 60.8 | 54.6 | 29.7 | 25.4 | 19.9 | 11.7 | 11.2 |
|
