Millermatic® 211 Auto-Set with MVP & Cart Includes a 40 Cu Ft Cylinder (Normally $ 129 for $ 79 extra) Welds material from 24 gauge to 3/8 in thick in a single pass. PART # 907422011
  
Mild Steel Welding Capability
Not to scale.
Min. — 24 ga (.8 mm)
Max. — 3/8 in (9.5 mm)
Auto-Set™: The right settings automatically - Set the wire diameter, a blue light shows that Auto-Set™ is activated Dial in the thickness of what you're welding Start welding with the exact parameters you need!
Infinite voltage control gives you the flexibility to manually set the machine when welding aluminum, stainless steel, or anytime you want to set your own parameters on mild steel.Welds thickest material in its class! The Millermatic® 211 Auto-Set™ with MVP™ has the highest output in its class. It can weld from 24 ga-3/8 in (0.8-9.5 mm) mild steel in a single pass on 230 V.  Spool gun ready out of the box! Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic® 211 Auto-Set™ with MVP™, the new Spoolmate™ 100 Series spool gun allows you to weld from 18 ga - 3/8 in aluminum.
Smooth-Start™ patented technology provides a smooth, spatter-free start. It's the best-starting machine in the small MIG machine category. No pop gun starts and virtually no spatter to clean up. Miller Exclusive! Multi-voltage plug (MVP™) allows you to connect to common 120 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle and connect it to the power cord.
Durable cast aluminum drive system incorporates dual-groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob, all designed to make set up easier and faster.Miller's exclusive "Tip Saver" short circuit protection™ shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at gun rather than at the machine.Cable management built into the handle.Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.Uses 4 or 8 in (102 or 203 mm) spools and can be set up to weld with wire sizes .024-.035 in (0.6-0.9 mm) mild/stainless steel and .030-.045 in (0.8-1.2 mm) flux cored.
ProcessMIG (GMAW) Flux Cored (FCAW)
ApplicationsLight Industrial ApplicationsLight Fabrication Maintenance and Repair Garage/ Body Shop Farm/Home
SpecificationsInput Power230 V, 25 A, 60 Hz, 1-Phase 120 V, 20 A, 60 Hz, 1-Phase
Rated Output150 A at 23.5 VDC, 30% duty cycle (230V) 90 A at 20 VDC, 20% duty cycle (120V)
Welding Amperage RangeWire Speed 60 - 460 IPM (1.5 - 11.7 m/min)
Net WeightComes Complete WithPower source 6 ft (1.8 m) power cord and MVP™ plugs 10 ft (3 m) M-10 MIG gun and cable assembly 10 ft (3 m) work cable and clamp Smith® Argon and AR/CO2 mix regulator/flow gauge with hose Spool of Hobart® .030 in (0.8 mm) solid wire Two contact tips for .030 in (0.8 mm) wire and two contact tips for .035 in (0.9 mm) wire Dual groove quick-change drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) wire Factory-installed gas solenoid valve Set-up and operation CD Information/settings chart Material thickness gauge (#229 895) Miller 300425 Running Gear 40 cu ft cylinder ( used - in test - empty)
|
